Home > Threadlocker Adhesive >

Anaerobic Adhesive Red Threadlocker Adhesive Wtih Low Viscosity

Product Categories

Hunan Baxiongdi New Material Co., Ltd.

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

Anaerobic Adhesive Red Threadlocker Adhesive Wtih Low Viscosity

Name: Anaerobic Adhesive Red Threadlocker Adhesive Wtih Low Viscosity
Brand: DEYI
Price: 1 USD

Brand Name : DEYI

Model Number : DY-N271

Payment Terms : T/T

Initial Cure Time : 5-10 Minutes

Package : 10g/tube; 20tubes/ small box; 200tubes/big box,50g/tube; 12tubes/small box; 120tusbes/ big box,250g/tube; 6tubes/small box; 60tusbes/ big box

Size : 54x31.5x32 (cm),62x36.4x18.5 (cm),58x50x19.5 (cm)

Shelf Life : 24 months

Contact Now

Anaerobic Adhesive Red Glue With Low Viscosity

1. Properties

DY-N271 is a single component anaerobic thread locking & sealing adhesive with the features of medium viscosity, and high strength. The product cures in the absence of air between two fitting metal surfaces to prevent loosening and leakage. It is applied to the permanent locking and sealing of the threads below M36, and prevents the rust on threads. It is commonly used for studs, like cylinders head studs.

2. Applications

Clear the contaminants like water, dusts, oil of the substrate surface to keep it clean, dry and smooth.
Spray all threads with enough glue and rotate several times. Allow them to dry. Better effect will be reached at the thickness of 0.05mm.
The bigger gap will affect cure speed and strength, especially for bigger screw threads.

3. Storage and warnings

Storage:

Store the adhesive in shady, dry, well-ventilated, damp-proofing placesã
Store the adhesive at room temperature.
Keep away from any source of ignition.

Warnings:

In the event of mass use, make a pre-test.
The adhesive is irritable to skin and eyes. Wear gloves while applying glue.
Keep out of reach of children.
In case of skin or eye contact, flush with water and seek medical treatment immediately if necessary.

4. Parameters

Item	Color	Viscosity(CPS/25â)	Filling Gap(mm)	Cure Time(25â/100g)
DY-N271	Red	600-1200	0.13	Touch Dry: 5-10mins
				Full cure: 24hrs

Failure Moment(N.m)	Remove the torque (N.m)	Heat Resistance(â)	Shelf Life(25â)
32	25	-60 to +165	24 months

Anaerobic Adhesive Red Threadlocker Adhesive Wtih Low Viscosity

Product Tags:

Anaerobic Adhesive Red Threadlocker Adhesive Wtih Low Viscosity Images

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Hunan Baxiongdi New Material Co., Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!

Anaerobic Adhesive Red Threadlocker Adhesive Wtih Low Viscosity

Anaerobic Adhesive Red Threadlocker Adhesive Wtih Low Viscosity

Red Threadlocker Adhesive

Low Viscosity Threadlocker Adhesive

10g anaerobic adhesive

Anaerobic Adhesive Red Threadlocker Adhesive Wtih Low Viscosity Images